Shopping Cart Shopping Cart $0.00 (0 Items)

Cart Summary

Close Close
View Cart
Leupold Mark 2 IMS Picatinny Style Scope Mount

Leupold Mark 2 IMS Picatinny Style Scope Mount



Leupold Mark 2 IMS Picatinny Style Scope Mount - Leupold mounts are every bit as rugged and dependable as the Leupold optics they're intended to secure.

Enter Quantity:


Add to Comparison
Ship To Store Stamp

Bookmark and Share

Leupold Mark 2 IMS Picatinny Style Scope Mount - The Leupold Integral Mounting Systems (IMS) family quickly and easily eliminates the two most common issues faced when mounting standard rifle scopes to AR-style rifles; scope height and eye relief. Each aluminum IMS cantilever design mounts directly to the firearm's Mil-Spec 1913/Picatinny to raise the scope and push it forward, eliminating the need for risers or specialized optics with shortened eye relief. All Leupold IMS products are tested to endure the rigors of the field and are covered by the Leupold Full Lifetime Guarantee.

  • Fits 1" scope tubes
  • 1 Piece Mount Style
  • Picatinny Base Type
  • 1 inch Height to Bottom of Rings
  • Aluminum Material
  • Matte Black Finish
  • Torx Screws
  • Integrated Mounting System - IMS

Solid mount for the money. 5 Stars.


This mount is solid compared to others which are flimsy in the price range. I did wish they have a subdued logo option in the future.

Atlanta, GA


Poor build quality.


When the mount arrived it was unusable. The clamp was installed so the Leupold name was upside down. The mount can't be tightened onto the rail. The second problem is that grew front scope ring cap is out of alignment and would damage the VX 3i scope I bought if it were installed. The cap is about .040 from being aligned with the bottom of the ring.

Stillwater, MN, USA


Rock solid mount


Fired 200 rounds with this mount so far. Had to remove it once for some maintenance on my 18" upper and the zero wasn't too far off. This is a rock solid mount. Fit and finish are excellent as well. Definitely recommend this to any AR user.



Great set up for the Springfield Saint


Got the AR Mod 1 1.5 X4 firedot mounted on my Saint. Easy to mount and out of the box this combo was dead on. I didn't bore site it just shot at 25 yards, then 75 and then 100. Dead on. Great combination. At 1.5 X there is a slight shadow of the front sight but is is acceptable. Any higher and it goes away. The Firedot is awesome. Highly Recommended

Warner Robins, Ga

Solid Mount


This mount is great. It's a solid piece that clamps my Mark AR scope on my rifle. Take the mount off from one rifle to another is a simple task. All that is required is the proper socket or wrench. My only dissapointment is that it is not a quick detachable mount. That would make the mount much eaiser to mount from rifle to rifle. Once the mount has been removed from rifle and remounted, scope stays zeroed.

California, USA


Solid mount, great price


Great machining and good clearance for 40mm scope on a standard AR with A2 hand guard with probably enough room for a 50mm. Awesome mount!

Minneapolis, MN, USA


By Far Greatest mount since Sliced Bread


Made in the USA.... Top Notch all the way around. Excellent eye relief, Bolts get the job done of holding everything steady. Built Solid, never a problem. I would highly recommend using a quality mount, like the Mark 2 IMS...

Lebanon NJ


Excellent Mount!


I purchased this mount a few months ago to mount a Leopold Mark AR scope to my AR-15. I couldn't be happier with this mount. Initially I mounted it and finger tightened the screws. This was not sufficient so I applied Loctite to the screws before tightening them down. That fixed the issue of the mount working itself loose while shooting. I could not be happier with this combination of scope and mount. There is no movement of my scope regardless of how many times I have broken down the rifle and re-assembled. It has also held my zero when I have removed the mount entirely and re-attached (with more Loctite). I have found this mount to be an excellent mount at an price, but particularly an excellent value at the price I paid for it.

Nashville, TN, USA


Excellent product


This mount works great on my Ruger SR-762, rock solid!

North Augusta, SC, USA



4.6 9


Customer Support


We are here to help if you need us, please contact Customer Support at: