Shopping Cart Shopping Cart $0.00 (0 Items)

Cart Summary

Close Close
Subtotal:
$0.00
View Cart
Leupold 2pc Dual Dovetail Scope Ring Bases
videoUrlUse:[ RNRY6IsjEz8 ] (e.g., IetIZ82pXc0)
Close video window
Leupold 2pc Dual Dovetail Scope Ring Bases
Comments: Leupold mounting systems

Leupold 2pc Dual Dovetail Scope Ring Bases

$27.99


Select a product from the chart below.

Leupold 2pc Dual Dovetail Scope Ring Bases - Leupold® mounts are every bit as rugged and dependable as the Leupold optics they're intended to secure. With a huge variety of mounting systems, you're sure to find the perfect match for you firearm.


Bookmark and Share

Leupold 2pc Dual Dovetail Scope Ring Bases - Leupold® mounts are every bit as rugged and dependable as the Leupold optics they're intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you're sure to find the perfect match for you firearm, and your style of shooting

  • Rifle scope mount features machined steel construction
  • Leupold's trademarked Dual Dovetail system provides a classic low-profile mount for rifle scopes on a variety of popular action
  • Mounts accept all Leupold rotary dovetail scope rings
  • Dovetail connections at both front and rear provide a rock-solid mounting platform for rifle scope

I have been using Leupold bases since 1977

5

The Leupold STD and Torx bases are outstanding. I recently got a new Browning X-Bolt rifle and picked up these Leupold bases. A+

Council, ID

true

Quality

5

I have put leupold mounts on more than 16 rifles, and they are without a doubt the best.

West Columbia, SC, United States

true

rear screw on the rear base stripped out

3

I bought the dual dove tail base for my Winchester model 70 featherweight today from Midway USA. I installed the bases, the front base had no issue and the screws were tightened to 24in-lbs using a wheeler torque driver. When installing the rear base, front screw had no issues but the rear screw stripped out.

Casper Wy

true

Mounted my VX-2 2-7x33 to my .416 Rem. Mag.

5

I used these bases and appropriate rings to mount my VX-2 2-7x33 to my Winchester Model 70 Super Express chambered in .416 Rem. Mag.. They have held together well and have not come loose. Even under the brutal recoil of the .416 using 400 gr. Solids. The scope returns to an acceptable zero (within an inch @ 100 yards) on this rifle. However, the may return to complete zero on less recoiling rifle.

New Mexico, United States

true

Solid

1

Would not work on my rem 700 308 bull barrel installed a bushnell elite 4500 and did not have enough elevation to hit 0 at 100 yards over 25 inches low when cross has are center

Ohio, United States

false

Redesigned windage screw slot w / T-15 - Not good

3

At first I thought it was a clever idea, in short order, however, I learned a T-15 with a near 1/16 inch slot cut through the middle of it, leaves no room for error, especially when you try to achieve the recommended torque of 45 in lbs. After mangling the T-15 pocket, on both sides – I resorted to the old standby to finish the job. To that I would say, if it's not broke don't fix it - but you broke it...so please fix it. Two (2) suggestions, and the first being my preference: 1) Lose the T-15 and widen the slot to the old design (feel free to warranty to me 2 new screws like this in silver) or; 2) lose the slot, and go to a T-25 or larger. Never together, new wine in old wineskin sort of thing. Otherwise, I found the other improvements to be good; the pre-lubed dovetail on both base and ring, and the Nylok patch on the screw threads. And I'm ok with the Leupold "L" embossed on the top of the rings. Recommend inexpensive means to mounting a scope - don't bother with the T-15 in windage screws.

Michigan, United States

true

Redesigned windage screw slot w / T-15 - Not good

3

At first I thought it was a clever idea, in short order, however, I learned a T-15 with a near 1/16 inch slot cut through the middle of it, leaves no room for error, especially when you try to achieve the recommended torque of 45 in lbs. After mangling the T-15 pocket, on both sides - I resorted to the old standby to finish the job. To that I would say, if it's not broke don't fix it - but you broke it...so please fix it. Two (2) suggestions, and the first being my preference: 1) Lose the T-15 and widen the slot to the old design (feel free to warranty to me 2 new screws like this in silver) or; 2) lose the slot, and go to a T-25 or larger. Never together, new wine in old wineskin sort of thing. Otherwise, I found the other improvements to be good; the pre-lubed dovetail on both base and ring, and the Nylok patch on the screw threads. And I'm ok with the Leupold "L" embossed on the top of the rings. Recommend inexpensive means to mounting a scope - don't bother with the T-15 in windage screws.

Michigan, United States

true

Only system i will put on anything, anymore.

5

Simple, Strong, Solid, need i say more. Just a great mount.

north dakota

true

AB3 BASES

2

This is a FYI not necessarily a complaint for the most part I've always been satisfied with my Leupold products. So i recently purchased a NIB AB3 with DD bases along with some standard rings for another rifle. First problem the standard rings were missing two screws which was an easy fix... Second issue was when trying to install the DD bases on AB3 the mounting screws turned and went nowhere, wrong size... So returned first set got another set and SAME problem. Screws are listed as #8's but look smaller, holes in receiver look like #10's. So I don't know if Leupold or Browning has an issue.

Undisclosed

false

Most of the People most of the time.

5

I've been using Leupold mounting systems for over 40 years and have yet to have a problem. I have mixed and matched with other brands such as Milett for certain looks and applications but I have never had a problem with any of them. After reading review after review I have come to a very old but simple conclusion. "You can please most of the people most of the time, but you can't please all of the people all of the time".. No company or product is perferct. Sooner or later we will make an imperfection. However, if one wants to be perfectly honest they would have to admit that these guys come as close to perfect as you can get. I have never had to scratch my head to figure out how to mount the mounts or rings. They make it so easy a cave man could do it. As for tech support, they have a team that is second to none. I have found that if you are one of those individuals that is confused about how to install one of their mounting systems, maybe you shouldn't own a firearm or anything with a sharp edge. Just saying. So, all that being said and after insulting a few people, I give Leupold a 10. A 5 just isn't good enough. Thank you Leupold for all the years of great product and my many many thousands of pounds of game in my freezer over the years.

Pasco, WA, United States

true

prod9999007262

3.8 36

71.4

Item # Model Finish Brand Price Order Online
305309 Remington 700 Gloss Leupold $27.99
305310 Remington 700 Matte Leupold $27.99
305311 Remington 700 Reversible Front Matte Leupold $27.99
305313 Winchester Model 70 Matte Leupold $27.99
305332 Browning A-Bolt Reversible Front Matte Leupold $27.99
1198670 Browning X-Bolt Matte Leupold $27.99
311715 Weatherby Mark V Reversible Front Matte Leupold $27.99
1433421 Tikka T3 Matte Leupold $27.99

Customer Support

<?>

We are here to help if you need us, please contact Customer Support at:
customerservice@sportsmanswarehouse.com