- There was an error
- It was successful
videoUrlUse:[ hdvWl7qHlWo ] (e.g., IetIZ82pXc0)
Lyman Rotating Gun Vise
Comments: Check out the Lyman Rotating Gun Vise in action!
- Hunting & Shooting > Shooting Equipment > Gun Care & Cleaning > Vises & Tools
Lyman Rotating Gun Vise(1242949)
TEMPORARILY SOLD OUT
Lyman Rotating Gun Vise - This revolutionary multi-function gun vise handles more maintenance chores than any other. Ideal for the active gunsmith to casual shooter.
Lyman Rotating Gun Vise - This revolutionary multi-function gun vise handles more maintenance chores than any other. Ideal for the active gunsmith to casual shooter. This versatile gun vise is engineered with a full range of adjustments, it tilts, clamps and has inserts to securely hold any firearm. The padded contact points protect the firearm during cleaning, maintenance or gunsmithing, even bore sighting. Just look at the collection of features built into this - the amazing Lyman Revolution.
- Secure, Padded Clamping
- Wide Range of Uses
- The Only Vise that Revolves!
- Wide Range of Adjustment
- Clamp Inserts for Secure Hold
- Holds Any Firearm
Reviewed by 3 customers
Displaying reviews 1-3
Solid, sturdy, well-designed, high quality and a real delight to use. I am highly pleased with mine. It makes rifle cleaning much, much easier!
One flaw noted: The clamping arrangement that holds the fore-end of the rifle is much too small for the fore-end of older military rifles. I have several with thick wood at the fore-end instead of a commercial rifle's long, naked barrell. Those rifles will not fit in the clamp. I can lay the front end of the rifle in the clamp, but cannot clamp it. A minor design change would fix this, but perhaps not enough customers own such rifles. Couldn't get my full-length M16 clamped, either, because the front signt is so elevated. Other than that, this is a good buy. The photo here in the review section shows a hunting type rifle with its wooden front clamped, but that rifle has a narrow fore-end.
I like the rotating heads and the way the clamp holds the stock. It could be just a bit longer, and it would have been nice if they would have designed it with "quick" clamps instead of having to spin the knobs in and out so much to accommodate different types of stocks. I would like it to have a larger tray with circular holders for solvent and gun oil, but its nice to be able to slide it back and forth to keep it out of the way. With the adapter you can clamp the forestock or the barrel this makes it nice for when you want to remove the action from the stock. If you plan on bolting it to your table they recommend only bolting the butt clamp end if you want to adjust the through.... well they really missed here its difficult to adjust. I put a 1/4 " shim under it and it helped some. I thought about making a couple of mounts for the forestock end to hold it up enough to allow that end to slide back and forth but i will need to get longer rods because it barley reaches past my rifles inc., light weight Strata's forestock. I don't want to sound like I don't like it because I do, Im just letting you know what I think would make it better.
This is a must have for the work bench. It holds firm and steady for whatever you need to do. Great for cleaning.
- Others Who Bought This Item Also Viewed