- There was an error
- It was successful
ATV TEK Trio HD Receiver Hitch with Ball Mount(1244886)
ATV TEK Trio HD Receiver Hitch w/ Ball Mount - The ATV TEK 2? Trio Receiver accepts standard accessories and installs solidly with improved movement-eliminating mounting hardware.
ATV TEK Trio HD Receiver Hitch w/ Ball Mount - The ATV TEK 2" Trio Receiver accepts standard accessories and installs solidly with improved movement-eliminating mounting hardware. The patent pending ?C" channel design guarantees maximum strength as well as giving a 3" rise for optimal towing height. The Trio Hitch features a welded-on 2" ball, reinforced tow loop/tie-down point and a clevis-pin hole. The included Quiet Tek wedge installs between the hitch and the receiver to minimize hitch rattle. Hitch pin included.
Welded-on 2? ball on a 3? rise
Reinforced tow loop/tie-down point
Movement eliminating mounting hardware
Quiet Tek wedge reduces hitch rattle
Reviewed by 1 customer
Displaying review 1
This thing is really well made and will fit my needs perfectly. There are a couple things to keep in mind. One, the bolt that comes with it. At 2 1/4" in length, depending on your atv, may be a little short. I prefer that the nut cover all the threads, which this one would not. I should add my atv is a Honda Rancher. I picked up a 2 1/2", hardened bolt at the store, and that length is perfect. Two, the nut and bolt takes a 1 1/8" socket/wrench. Using a 1/2" ratchet and boxend wrench, putting all I had to offer in tightening it, the receiver would still slip. Minimal, but still unacceptable. Using a 2 foot cheater on the ratchet, it snugged up nicely, and I couldn't get it to slip from tapping it with a hammer. It did come packaged with the pin and key as shown, and the plastic wedge actually works. Had I not had an issue with the receiver slipping on initial tightening, I would have given it a 5 star rating. That's still not enough to prevent my purchasing this same setup should I ever need another one.
- Others Who Bought This Item Also Viewed